Installing the latest fi rmware
Periodically Philips will issue upgrades for
the fi rmware that was initially installed in
your recorder as the fi rmware is
continuously refi ned for greater stability
and compatibility of the recorder.
CAUTION! Power supply must not be
interrupted during upgrade!
System
Setup
Jump forward
Jump back
Version Info
A
Get the version information of this
recorder by pressing SYSTEM on the
remote control and select { Setup } >
{ System } > { Version Info } in the
menu.
Write down the information of your
current software version.
B
Visit Philips website 'www.philips.com/
support' to check the availability of latest
fi rmware upgrade. Download the
software programme to a CD-ROM.
C
Press OPEN CLOSE ç on the front
of the recorder to open the disc tray.
D
Insert the CD-ROM and press OPEN
CLOSE ç again.
The fi rmware will start to install on
the recorder automatically.
dvdr5350H_UK_Eng2.indd 81
dvdr5350H_UK_Eng2.indd 81
mm : ss
mm : ss
Firmware Upgrade
2005-10-10 11:00:43 AM
2005-10-10 11:00:43 AM
81