Alfa Romeo MiTo Blue&Me Nav Manual page 75

74
}
To set the GPRS code using voice inter-
action, proceed as follows:
Press , pronounce "Settings" and
'
then "Connection code".
Blue&Me™ Nav will prompt "The
current GPRS connection code is value .
To change code say a number from 1 to
9 or say "Default". To disable the con-
nection code say "Disable". To change
the code, say a number from 1 to 9 or
say "Default". To disable the connection
code say "Disable". (In previous text, val-
ue is the GPRS connection code set at that
moment).
After setting the new connection code,
Blue&Me™ Nav will say "The Con-
nection Code is set to value " (here value
corresponds to the new GPRS code set).
SETTINGS FUNCTIONS
EXIT THE SETTINGS MENU
At the end of any of the operations described
above, you can exit the settings menu as
described below.
?
To exit the SETTINGS menu using man-
ual interaction:
Select EXIT and then press SRC/OK
or ß /MENU.
}
Or, using voice interaction:
Press ' and pronounce "Exit".