Alfa Romeo MiTo Blue&Me Nav Manual page 101

100 100 100
Problem
Displayed message:
NO PLAYLISTS FOUND
Or Blue&Me™ Nav says:
"No playlist found"
Displayed message:
INVALID PLAYLIST
Displayed message:
EMPTY PLAYLIST
Or Blue&Me™ Nav says:
"Empty playlist."
Displayed message: BAD MEDIA
Indication on sound
system display:
MEDIAPLAYER
in absence of USB device
connected to the car USB port
TROUBLESHOOTING
Probable Cause
No playlist is stored on the USB
device connected
Playlist is damaged or invalid
❍ No media file is contained
in the playlist
❍ The .wpl file is too large for
Blue&Me™ Nav memory capacity
❍ The playlist does not containreferences
to media files on your USB device
Digital audio file is damaged or invalid
The USB device has been removed
from the car USB port with the
ignition key at STOP
Possible Solution
Build a playlist on your computer using your
media file software and then copy it to your USB
device
❍ Make sure the playlist is in .m3u or .wpl format.
❍ Build the playlist again following the instructions
given in section BUILDING PLAYLISTS FOR
Blue&Me™ Nav - PRACTICAL HINTS.
❍ If the problem persists, delete the playlist from
your USB device.
❍ Delete the playlist from your
USB device or copy media files to the playlist
using your media file software.
❍ Reduce the number of tracks
in the playlist, using your media file software.
Delete bad media from your USB device
❍ To change the current audio source, press button
SRC/OK or the dedicated buttons FM, AM, CD
on the sound system front panel.
❍ With ignition key at MAR, insert and then
remove the USB device from the car USB port.
❍ To avoid displaying of MEDIAPLAYER indication in
absence of USB device, always remove the USB
device when the ignition key is at MAR, or stop
playback (with voice command STOP) before re-
moving the USB device from the car USB port.