Connect Power Cord; Attach Table Stand - Philips HTS6520/98 User Manual

Connect power cord

Warning
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or underside of
the subwoofer. Set the voltage selector (if any)
correctly before you connect the subwoofer
to the power outlet.
1
Connect the power cord to the power
outlet when all the required connections
are done.
»
The Home Theater System is ready to
be set up for use.

Attach table stand

Align Arrow
With table Stand
Align Arrow
With table Stand
A = table stand bracket.
1
Ensure all the required cables are
connected to this Home Theater System
and close the rear cover.
2
Attach the table stand bracket to the rear
of this Home Theater System.
• Align the arrow indicators for
correct positioning and placement.
• Use the protrude panels to hold the
table stand bracket.
A
A
A
EN 17