Table of Contents
Advertisement
2.3
SET & ADJUST PITCH
2.3.1
Pitch is the up and down movement of the Articulating Arm (FIG. 2.7). After determining the total
weight load (the combined weight of your lifting equipment plus the individual) you may need to adjust
the pitch.
Pitch adjustment is required for smooth ORBIT operation and may need to be adjusted for each
individual load.
2.3.2
Level the Articulating Arm (with Torpedo Level) by adjusting the 1/2" Pitch Set Screw (FIG. 2.2, FIG.
2.6, and FIG. 2.8).
An unleveled pitch may result in the Articulating Arm being able to free swing. Please use caution
and ensure that the pitch is level at all times.
2.3.2.1 Pitch down (lower) (FIG. 2.7) the Articulating Arm lifting end by turning the 1/2" Pitch Set
Screw (FIG. 2.8) counter-clockwise.
2.3.2.2 Pitch up (raise) (FIG. 2.7) the Articulating Arm lifting end by turning the 1/2" Pitch Set Screw
(FIG. 2.8) clockwise.
FIG. 2.7
2.4
SET & ADJUST BRAKE
2.4.1
The 1/2" Brake Set Screw (FIG 2.1, FIG. 2.6, and FIG. 2.7) increases/decreases Stanchion rotational drag.
"Drag" is the resistance of the Stanchion to the pushing and pulling of the ORBIT operator. Drag is
used to provide the operator more control over Stanchion rotation; the Stanchion rotation will
follow the Articulating Arm's lead.
2.4.2
To increase Stanchion drag, turn the 1/2" Brake Set Screw (FIG. 2.9) clockwise (inward).
2.4.3
To reduce Stanchion drag, turn the 1/2" Brake Set Screw (FIG. 2.9) counter-clockwise (outward).
The patient is moved by pushing/pulling the motor or sling; do not allow patient or operator to
physically touch the Stanchion or the Articulating Arm during operation.
The key to easy ORBIT use is to lead with the outside Articulating Arm and drag the Stanchion
with your motion.
Practice and accurate adjustment are important for safe and proper ORBIT operation.
Page | 8
FIG. 2.9
FIG. 2.8
EZ-ACCESS® ORBIT™ Patient Transfer Lift
Advertisement
Table of Contents
