Use And Operation - Honeywell HN Series User Manual

USE & OPERATION
CONTROL PANEL
(2) (4)
HIGH COOL
MID DRY
LOW FAN
HEAT
Model with Heat Mode
1) Timer Control / Sleep Control
2) Fan Speed Control
3) Timer / Temperature Set Controls
FUNCTION BUTTONS
POWER CONTROL
The Power Control
outlet, the POWER indicator light will illuminate red indicating the unit is in a Standby Mode, ready
to be switched on at anytime. The air vent will automatically open when the unit is turned ON and
automatically close when unit is turned OFF.
TIMER CONTROL
The Timer is adjustable between 1 - 24 hours.
AUTO TURN OFF:
While unit is running, press the TIMER button and the display will flash. While the display is
flashing, press the + or - button to select the number of hours you want the unit to turn OFF
automatically.
AUTO TURN ON:
When unit is in a standby mode (plugged in with power light on), press the TIMER button and the
display will flash. While the display is flashing, press the + or - button to select the number
of hours until you want the unit to turn ON automatically.
TEMPERATURE CONTROL
• Used for adjusting the timer and thermostat.
•
The default display is setting temperature.
• In cooling mode, when + or - button is pressed, the set temperature is displayed and may be
adjusted. After 5 seconds the display will revert back to room temperature.
Note: By pressing both + / - buttons at the same time, the display will toggle between Celsius(°C)
and Fahrenheit(°F).
(3) (1) (6) (5)
POWER
TIMER
TIMER
C
o
o F
SLEEP
WATER
SLEEP
FULL
turns the unit on and off. When the unit is plugged into an appropriate electrical
(2)
HIGH COOL
MID DRY
LOW FAN
Model without Heat Mode
4) Mode Control
5) Power Control
6) Indicator Lights
EN 6
(4) (3) (1)
TIMER
C
o
o F
SLEEP
(6) (5)
POWER
TIMER
SLEEP
WATER
FULL