Advertisement
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Use grinder in a suitable work area. Keep area clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
9
maintain correct balance and footing. do noT over-reach and ensure that the floor is not slippery. Wear non-slip shoes.
9
Use only approved grinding discs and only use the normal grinding surface. never use the side or upper surface of disc for cutting.
9
The grinding disc may only be changed by a person holding a grinding wheel certificate.
9
Check grinding disc to ensure it is not split, cracked or damaged in anyway. If in doubt do noT use the disc.
9
Grinding discs must be securely attached before use, but not overtightened.
9
This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.
This tool is subject to the vibration testing section of the machinery directive 2006/42/eC.
This tool is to be operated in accordance with these instructions.
measured vibration emission value (a): . . . . . . . . . . 10.232 m/s²
Uncertainty value (k): . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 m/s²
measured vibration emission value (a): . . . . . . . . . . . . 8.42 m/s²
Uncertainty value (k): . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 m/s²
measured vibration emission value (a): . . . . . . . . . . . 2.989 m/s²
Uncertainty value (k): . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 m/s²
measured vibration emission value (a): . . . . . . . . . . . 5.634 m/s²
Uncertainty value (k): . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 m/s²
Please note that the application of the tool to a sole specialist task may produce a different average vibration emission. We recommend that a
specific evaluation of the vibration emission is conducted prior to commencing with a specialist task.
A health and safety assessment by the user (or employer) will need to be carried out to determine the suitable duration of use for each tool.
nB: Stated Vibration emission values are type-test values and are intended to be typical.
Whilst in use, the actual value will vary considerably from and depend on many factors.
Such factors include; the operator, the task and the inserted tool or consumable.
nB: ensure that the length of leader hoses is sufficient to allow unrestricted use, as this also helps to reduce vibration.
The state of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase the risk of Hand Arm Vibration
Syndrome.
Health surveillance.
We recommend a program of health surveillance to detect early symptoms of vibration injury so that management procedures can be modified
accordingly.
Personal protective equipment.
We are not aware of any personal protective equipment (PPe) that provides protection against vibration injury that may result from the
uncontrolled use of this tool. We recommend a sufficient supply of clothing (including gloves) to enable the operator to remain warm and dry and
maintain good blood circulation in fingers etc. Please note that the most effective protection is prevention, please refer to the Correct Use and
maintenance section in these instructions. Guidance relating to the management of hand arm vibration can be found on the HSC website
www.hse.gov.uk - Hand-Arm Vibration at Work.
2. INTRODUCTION
MODEL No SG101.V2 Suitable for a variety of trade applications. Features heavy-duty alloy bevel gear head with composite body casing and spin-
dle lock for fast loading/unloading of discs. 600W Heavy-duty motor develops powerful 11000rpm (no load speed). Supplied with side handle, guard
and spanner. Fitted 3mtr power cable with BS approved non rewirable plug. Grinding disc not included, order model no. PTC/100G.
MODEL No SG115.V2 Suitable for a variety of trade applications. Features heavy-duty alloy bevel gear head with composite body casing and spin-
dle lock for fast loading/unloading of discs. 900W Heavy-duty motor develops powerful 11000rpm (no load speed). Supplied with side handle, guard
and spanner. Fitted 3mtr power cable with BS approved non rewirable plug. Grinding disc not included, order model no. PTC/115G.
MODEL No SG125 Suitable for a variety of trade applications. Features heavy-duty alloy bevel gear head with composite body casing and spindle
lock for fast loading/unloading of discs. 1000W Heavy-duty motor develops powerful 11000rpm (no load speed). Supplied with side handle, guard
and spanner. Fitted 3mtr power cable with BS approved non rewirable plug. Grinding disc not included, order model no. PTC/125G.
MODEL No SG2303.V2 Heavy-duty alloy bevel gear head with composite body housing a powerful 2000W motor. Fitted with soft start to reduce
mains draw when switched on. Spindle lock device for fast loading/unloading of discs. Supplied with side handle, guard and spanner. Fitted 3mtr
power cable with BS approved non rewirable plug. Grinding disc not included, order model no. PTC/230G.
3. SPECIfICATION
model .....................................................................SG101.V2
Power input ..................................................................... 600W
no-load speed ...........................................................11000rpm
Spindle Size .......................................................................m10
Grinding/cutting disc max. dia. ......................................100mm
Sound Pressure/power level .................................. 85/96dB(A)
Weight ..............................................................................1.8kg
model .....................................................................SG115.V2
Power input ..................................................................... 900W
no-load speed ...........................................................11000rpm
Spindle Size .......................................................................m14
Grinding/cutting disc max. dia. ......................................115mm
Sound Pressure/power level .................................. 86/97dB(A)
Weight ..............................................................................2.2kg
© Jack Sealey limited
WARNING! – Risk of Hand Arm Vibration Injury.
model no SG101.V2
model no SG115.V2
model no SG125
model no SG2303.V2
Original Language Version
SG101.V2
SG101.V2, SG115.V2, SG125, SG2303.V2 Issue 5 (1,3) 02/05/18
fig.1A
Advertisement
