Clearing The Program; Using The Menu Bar To Program - Philips MX5600D/99 Quick Use Manual

4
Press S, then use the numeric keypad
(0-9) to enter the disc number.
➜
"DISC X" appears.
5
Press T, then use the numeric keypad
(0-9) to enter the track number.
➜
"TRACK X" appears.
6
Press OK to store the track.
7 4 6
Repeat steps ~
tracks.
8
Press ÉÅ to start program playback.
➜
Only the tracks programmed from audio
CDs and VCDs will play.
9
Press Ç to stop playback or exit program
mode.
Notes:
– Pressing OPEN•CLOSE button of the
programmed disc tray will erase the programme.
– If you do not press any buttons within 20
seconds, the system will exit programming mode.

Clearing the program

G
Stop playback, then press and hold Ç.
➜
disappears from the display panel and
PROG
"PROGRAM CLEARED" appears.
Note:
– If the DVD system is disconnected from the
power supply, the program will be erased.
to select other discs and
Disc Operations

Using the menu bar to program

IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel. (See page 21
"Setting the TV".)
2
,
PROGRAM DISC
1
2
3
4
5
6
1
Stop playback, then press SYSTEM MENU.
➜
The menu bar will appear across the top of
the TV screen.
2
Use the joystick (1 2) to select
to enter the program menu.
3
Use the joystick (1 2 3 4) to move within the
program menu and use the numeric keypad
(0-9) to enter the disc and track number to be
programmed.
4
Press ÉÅ to start program playback.
➜
Only the tracks programmed from audio
CDs and VCDs will play.
G
In stop mode, you can press PROG on the
front panel to toggle between program on and
off.
To clear the program
G
Stop playback, then press and hold Ç.
SYSTEM MENU DISC MENU
1
3
SEATING ZOOM
PREV NEXT
4
OK
STOP PLAY/PAUSE
PROGRAM
DISC SKIP REPEAT REPEAT
TRACK
and press 4
27