WARNING
Risk of electric shock!
Connect audio input only to a device conforming
X
to IEC 60065, the IEC-Norm for audio, video and
other electronic devices.
WARNING
Interference with implantable devices
The device can be used with all
X
electronic implants that comply with the
ANSI/AAMI/ISO 14117:2012 Electromagnetic
compatibility standard for human implants.
In case your implant does not comply with the
X
ANSI/AAMI/ISO 14117:2012 standard, consult
the manufacturer of your implantable device for
information about the risk of disturbance.
WARNING
This device may interfere with measuring and
electronic equipment.
Do not use your device on airplanes or areas
X
where sensitive or life-supporting electronic
equipment is used.
WARNING
Risk of explosion!
Do not use your device in explosive
X
atmospheres (e. g. in mining areas).
12
Product safety
NOTICE
Protect your devices from extreme heat. Do not
X
expose them to direct sunlight.
NOTICE
Protect your devices from high humidity.
X
NOTICE
Do not dry your devices in the microwave oven.
X
NOTICE
Different types of strong radiation, e. g. during
X-ray or MRI head examinations, may damage
devices.
Do not use the devices during these or similar
X
procedures.
Weaker radiation, e. g. from radio equipment or
airport security, does not damage the devices.
In some countries restrictions for the usage of
wireless equipment exist.
Refer to local authorities for further information.
X
13
Need help?
Do you have a question about the Smart Transmitter and is the answer not in the manual?
Questions and answers
Trying to pair the Connexx smart transmitter 2.4 with an hearing aid and iPhone. Not working.
To pair the Connex Smart Transmitter 2.4 with a hearing aid:
1. Connect the transmitter to a power supply.
2. Connect the transmitter to an audio device (TV, stereo, etc.) using the appropriate cable.
3. Put the hearing aids into pairing mode.
4. Press the pairing button on the transmitter.
5. Wait for the LED on the transmitter to indicate successful pairing.
To pair the hearing aids with an iPhone, follow the standard Bluetooth pairing process through the iPhone's accessibility settings.
Note: The transmitter does not support direct Bluetooth connection to an iPhone. It streams audio from non-Bluetooth devices to the hearing aids.
This answer is automatically generated