Table of Contents
Advertisement
Available languages
Available languages
The orange LED shows the status of the TOSLINK
connection.
Steady orange light
➧
TOSLINK cable is connected and audio
signal in the required format is available. Refer
to section "Connecting to audio devices".
Flashing
➧
TOSLINK cable is connected, but the audio
signal has the wrong format. Refer to section
"Connecting to audio devices".
Orange LED off
➧
No TOSLINK cable is connected or the cable
is not connected properly.
➧
TV or audio device is switched off.
➧
TOSLINK cable is broken.
10
Important safety information
Personal safety
WARNING
Choking hazard!
Your device contains small parts which can be
swallowed.
Keep hearing instruments, batteries and
X
accessories out of reach of children and
mentally disabled persons.
If parts have been swallowed consult a physician
X
or hospital immediately.
WARNING
Risk of electrical shock!
Do not use obviously damaged devices and
X
return them to point of sale.
WARNING
Note that any unauthorized changes to the product
may cause damage to the product or cause injury.
Use only approved parts and accessories. Ask
X
your Hearing Care Professional for support.
11
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Smart Transmitter and is the answer not in the manual?
Questions and answers
Trying to pair the Connexx smart transmitter 2.4 with an hearing aid and iPhone. Not working.
To pair the Connex Smart Transmitter 2.4 with a hearing aid:
1. Connect the transmitter to a power supply.
2. Connect the transmitter to an audio device (TV, stereo, etc.) using the appropriate cable.
3. Put the hearing aids into pairing mode.
4. Press the pairing button on the transmitter.
5. Wait for the LED on the transmitter to indicate successful pairing.
To pair the hearing aids with an iPhone, follow the standard Bluetooth pairing process through the iPhone's accessibility settings.
Note: The transmitter does not support direct Bluetooth connection to an iPhone. It streams audio from non-Bluetooth devices to the hearing aids.
This answer is automatically generated