Download Print this page

Troubleshooting - Kogan KAHUTRCA810A Quick Start Manual

Hunting trail camera

Advertisement

TROUBLESHOOTING

Camera doesn't capture subject of interest
Check the PIR sensitivity for warm environmental conditions. Set the Sensor Level
to "Low"; for cold weather use, set the sensor to "High".
Set your camera up in an area where there are no heat resources in the camera's
field of view.
In some cases, setting the camera near water will make the camera to take
images with no subject in them.
Aim the camera over ground.
Set the camera on stable and immovable objects, i.e., large trees.
At night, the motion detector may detect beyond IR illumination range. You can
reduce distance by adjusting sensor sensitivity.
The rise or setting of the sun can trigger the sensor; reorient the camera.
If a person or animal moves quickly, it may move out of the camera's field of view
before the photo is taken. Move camera further back or redirect camera.
Camera stops taking images
Ensure that the memory card has enough memory storage. If the card is full,
camera will stop taking images.
Check batteries to make sure that alkaline, NIMH or lithium AA batteries left power
is enough for camera to work.
Make sure that the camera power switch is at the "ON" position and not at the
"OFF" or "TEST" modes.
Please format the memory card when you use it for the first time or use another
memory card.
Night vision flash range doesn't meet expectation
Although the camera will operate well with 4 x AA batteries, 8 x AA batteries will
improve performance and provide better battery life during night vision.
Ensure that batteries are fully charged or left power is enough.
High-quality 1.5V NIMH or lithium rechargeable AA batteries can offer superior
flash range than alkaline batteries.
To ensure accuracy and quality of night time image, mount the camera in a dark
environment without obvious light sources.
Having surfaces for the flash to bounce off (trees, walls, ground, etc.) within flash
range is important to get good night time images. In an open field, there will be
nothing for the light to reflect on and the images will be poorer.

Advertisement

loading