•
ETH1 configuration refers to the Ethernet gateway port of the inverter network. The
preferred IP setting is STATIC.
•
If IP setting is
•
STATIC - allows to assign a fixed IP address. When data for assigning the IP
static address appears, complete all additional fields except the secondary DNS
server.
•
DHCP - router automatically assigns a dynamic IP address whenever the
network is connected.
6. If configuration is successful, the connectivity check status shows green. Click Close.
If configuration is not successful, recheck the connections to the gateway and repeat
the steps for
Configuring the gateway (page
At any point-of-time to check the connectivity status, go to Service Tools →
Connectivity Check.
22).
Start-up 27
12