Table of Contents
Advertisement
Tuner Operations
IMPORTANT!
Make sure the FM and MW
antennas are connected.
Tuning to radio stations
1
Press TUNER on the remote (or press
SOURCE control at the front panel) to
select "FM" or "MW".
2
Press 3 / 4 briefly on the remote.
➜
The display panel will show "SEARCH"
until a radio station with sufficient signal
strength is found.
3
2
Repeat step
if necessary until you find
the desired radio station.
4
To tune to a weak station, press 1 / 2
briefly and repeatedly until an optimal
reception is found.
38
Presetting radio stations
You can store up to 40 FM and 20 MW
preset radio stations in the memory.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no valid frequency is detected during
Plug and Play,"PLEASE CHECK FM/MW
ANTENNA" appears.
Using the Plug and Play
Plug and Play allows you to store all
available radio stations automatically.
1
For first time setup, press TUNER.
➜
"AUTO INSTALL PRESS PLAY"
appears.
2
Press PLAY B until "START ..." appears
on the display panel.
➜
The system will start searching from
FM band and followed by MW band.
All the available radio stations with strong
signal strength will be stored
automatically.
➜
Once complete, the last tuned radio
station will play.
DVD system's
display panel
AUTO INSTALL..
1
START..
2
Advertisement
Table of Contents
