Clas Ohlson SMP-27WME-UK Manual

AC/DC adaptor

Art.no 18-2933 / 36-5930
Model SMP-27WME-UK / SMP-27WME
Please read the entire instruction manual
before using the product and then save it
for future reference. We reserve the right
for any errors in text or images and any
necessary changes made to technical data.
In the event of technical problems or other
queries, please contact our Customer
Services.

Use

1. Make sure that the connected device's
power consumption does not exceed
the adaptor's maximum output power.
2. Find out which of the provided DC
connectors fits your product (try them
for size loose).
3. There are two polarities for DC voltage,
positive and negative. The AC/
DC adaptor is made for devices
with a positive (+) or negative (−)
central conductor. The polarity of
the interchangeable DC connectors can
be reversed to the correct polarity.
GREAT BRITAIN
customer service tel: 0845 300 9799 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.com/uk
4. Check the polarity markings on the pro-
duct you wish to connect, adjust the DC
connectors like this:
- Negative (−) on the centre pin:
Turn the DC connector so that
the (−) symbol is seen in front of
the TIP mark.
- Positive (+) on the centre pin:
Turn the DC connector so that
the (+) symbol is seen in front of
the TIP mark.
5. Make sure that the DC connector
is pressed all the way into the cable
connection.
6. Set the desired output voltage (3 V/5 V/
6 V/7.5 V/9 V/12 V) using a small
screwdriver and plug the cable with
the correct DC connector on the end
into the socket of the device to be
powered by the adaptor.
7. Connect the adaptor to a power point,
the LED should light up.
8. Switch on the connected device.

Warning:

• The wrong voltage or polarity can
damage the connected device.
• Only connect devices that have a power
consumption of max 27 W.
• Turn off the connected device before
connecting/disconnecting the adaptor.
• Do not position the adapter where it is
exposed to moisture or water.

Specifications

Rated voltage: 100–240 V AC, 50/60 Hz
Output voltage (stabilized): 3 V/5 V/6 V/
7.5 V/9 V/12 V, max 2.25 A

Disposal

This product should be disposed of in
accordance with local regulations. If you are
unsure how to proceed, contact your local
council.