Clas Ohlson SPM 125 USB Instruction Manual

Laptop AC/DC Adaptor
Art.no. 36-4155 / 36-3693 Model SPM 125 USB / SPM 90
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact
Customer Services.

Selecting the output voltage

Select the correct voltage before connecting the adaptor to your laptop.
Check the specifications on the rating plate and the voltage marking on
your adaptor input on your laptop. Information about the operating voltage
can even be found in the instruction manual for your laptop.
Make sure that your laptop does not draw more power than the adaptor
capacity. Refer to the specifications for your particular model.
Use the included tool or a slotted screwdriver to set the voltage.
Make sure the selector dial is really on the correct setting. Remeber that
an incorrect voltage setting may seriously damage your laptop beyond
repair. If you are unsure, do not connect the adaptor to your laptop.
Contact our Customer Services.

Connecting to a USB device

(36-4155 SMP125)
1. It is possible to connect USB devices (iPods, MP3s, etc) to the adaptor
whilst you are charging your netbook or have it in standby mode.
Q
K
2. The output from the USB port is 5 V DC, 500 mA. Do not connect a USB
device which draws more current than 500 mA.
D G
F
3. Connect the power lead to the adaptor before plugging the adaptor into
the wall outlet. The LED on the adaptor will light up to indicate that it is on.
4. You can now connect the USB device.
5. The USB port is always live and can be used regardless of the output
voltage setting.

DC Connectors

• The adaptor comes with different sized interchangeable connectors.
• Using the table you can determine the correct size connector for
your laptop.
• The connectors are coded with letters to simplify your choice.
GREAT BRITAIN • for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
N.B. The connector marked "Q" also has the text
"For use with HP/Compaq laptop".
This should not be confused with the connector
marked "K" which is meant for DELL laptops.
DC Image
Connector
A
A
A
B
B
B
A C
Q K
A C
B
A
D
B
E
B
F
A
C G E D G
G
B
H
K
Q
A
B
A
Q K
Inner/Outer Models
dimensions
2.1/5.5 mm Acer – AcerNote,
AcerNote Light series
IBM – Thinkpad series
Lenovo – Thinkpad series
2.5/5.5 mm Acer – Aspire, AcerNote,
Extensa, Ferrari series
Compaq – Business Notebook,
Evo, Presario series
Dell – Inspiron series
Fujitsu – Amilo, Lifebook
HP – Omnibook, Pavilion series
G E D IBM – Thinkpad, Transnote series G
F
Lenovo – Thinkpad series
Packardbell – EasyNote series
Toshiba – Satelite, Tecra series
1.7/4.75 Compaq – Armada, Evo,
mm Presario, Prosignia series
HP – Pavilion series
3.0/6.3 mm Toshiba – Libretto, Portege,
Qosmio, Satellite, Tecra
1.4/4.65 mm Fujitsu – FMV-BIBLO,
Lifebook, Stylistic series
Panasonic – all series
Sony – PictureBook, VAIO series
3 PIN DELL Dell – Inspiron,
Latitude series
F
1.0/5.0 mm Samsung – all series
1.9/5.5 mm Acer – Travelmate series
0.6/7.4 mm Compaq – Business
Notebook series
Dell – Inspiron
Precision, XPS series
A
0.6/7.4 mm HP Compaq – NX series
B

Positive and negative polarities

There are two polarities for DC: positive and negative. The AC/DC
C G E D G
F
adaptor is made for devices with a positive (+) centre connector.
The interchangeable connectors cannot be connected incorrectly.
They can only be connected in one direction which gives a positive (+)
centre. Make sure to securely fasten the connector to the cable end
and make sure the connector is free from dust or contaminants. This
is extremely important for establishing a good connection.
_
+
Positiv center connector

Specifications

36-4155 SMP 125 USB
Adjustable stabilised output voltage:
12, 14, 15, 16, 18, 18.5, 19, 19.5, 20, 21, 22 V DC.
Max. Load: 12 V/6.5 A, 14-20V/6 A and 21-22 V/5 A (125 W).
USB output: 5 V/500 mA.
36-3693 SPM 90
Adjustable stabilised output voltage:
12, 14, 15, 16, 18, 18.5, 19, 19.5, 20, 21, 22 V DC.
Max. Load: 12 V/6 A, 14-16 V/5 A and 18-22 V/4.5 A (90 W).
Caution
• Incorrect voltage or polarity can damage your laptop.
• Do not connect the adaptor to a device with a higher power
consumption than the max. specified load.
• Do not dismantle the adaptor.
• Turn off your laptop before connecting/disconnecting the adaptor.
• The AC/DC adaptor is made for devices with a positive (+) centre
connector.
• Do not expose the adaptor to moisture. For indoor use only.
• Always unplug the adaptor when it is not in use.
• The power lead should be checked regularly. Never use the device
if the power lead or plug is damaged.
• If the power lead is damaged it must only be replaced with a power lead
recommended by the manufacturer or its service centre.

Disposal

Follow local ordinances when disposing of this product. If you are unsure of
how to dispose of this product, please contact your municipality.
Cable end