3 Connect
This section describes the basic connections
required for this DVD Home Theatre unit
before it can be used.
Basic connections:
•
Place the unit
•
Connect video cables
•
Connect wireless transmitter
•
Connect speaker cables to speakers
•
Connect speaker to speaker stand
•
Connect speakers and subwoofer
•
Connect rear speakers to wireless receiver
•
Connect radio antenna
Optional connections:
•
Connect other devices
•
Connect audio from TV
•
Connect audio from cable box/
recorder/game console
•
Connect portable media player
•
Connect USB device
•
Connect iPod docking station
Note
•
Refer to the type plate at the rear or bottom of the
product for identifi cation and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Place the unit
•
Never place this unit an enclosed cabinet.
•
Install this unit near the AC outlet where
the AC power plug can be easily reached.
2
2
2
4
2
1
Place this DVD Home Theatre unit near to
the TV.
2
Place the speakers system as per the
diagram shown above.
•
Find the most suitable placement for
the speakers based on your room
layout and set up to ensure optimum
sound performance.
3
Place the subwoofer at the corner of the
room or at least one metre away from the
TV.
4
Place the wireless receiver near to the AC
outlet and in between the rear speakers.
Position the wireless receiver (with Philips
logo) directly parallel to the DVD Home
Theatre unit.
Note
•
Rear speakers are labelled as REAR LEFT and REAR
RIGHT.
•
Front speakers are labelled as FRONT LEFT and
FRONT RIGHT.
•
To avoid magnetic interference or unwanted noise,
never place the speakers too close to the TV or any
radiation devices.
2
1
3
EN
9