Profi Cook PC-SMS 1095 Instruction Manual page 44

• Chop up large pieces of solid food before
mashing (max. Ø 1.5 cm) and add a little liquid.
• Do not fill the supplied container beyond the
MAX marking.
• Pay attention to the slowing down of the motor
after shutting off.
• Short-time operating: The appliance is
designed to be operated for short periods of a
maximum of 30 seconds. Before using again,
allow to cool for approx. 60 seconds.
Attachment
Mixing rod (5)
Whisk (7)
Multi-purpose blade
(9)
Switching the device off
• The device switches itself off when the button
is released.
• Always wait until the knife on the stick blender /
multi-chopper or egg whisk has come to a
complete stop!
• Pull out the plug from the socket after use.
Clean the device as described under "Clean-
ing".
Using the Mixing Rod and Whisk
WARNING:
When using the device in hot foods, there is a
risk of burns due to splashing.
1. Make sure that the plug is not inserted! Unwind
the mains lead completely.
2. Select an accessory. Please note the section
"Attaching Accessories".
44
Function
For mixing and stirring shakes,
drinks, omelette mixtures, sauces,
puréeing soups and sauces
For beating cream, egg white and
blancmange and whipping up
sauces, sponge cake mixture and
other airy and foamy foods
For chopping and dicing onions,
nuts, herbs etc.
Operation
• Hold the handle with one hand in such a way
that you can press the push button (2). Use the
other hand to adjust the speed with the rotary
control (1).
• Activate pulse operation by pressing and
releasing the push button at intervals.
• Use the TURBO button to select the highest
power setting.
Speed
Variable adjust-
ment or TURBO
button
Variable adjust-
ment or TURBO
button
Variable adjust-
ment or TURBO
button
3. Immerse the mixer head or beater fully into the
food or drink. Hold the device vertically. By do-
ing so you prevent splashing.
4. Only connect the machine to a properly in-
stalled safety socket.
5. Press one of the buttons. Move the mixing rod
or whisk up and down.
Using the Multi-chopper
1. Make sure that the appliance's plug is not
inserted in the socket!
2. Fit one or both knives into the container.
3. Place the multiple chopping machine on a flat,
level surface.
4. Cut the food to be mixed beforehand into small
pieces. Fill the container. Observe the MAX
marking.
5. Close the container with the lid.
6. Place the motor casing on the upper opening
of the lid and fasten the multi-chopper by turn-
ing it to the right.
Operating Time
30 seconds
30 seconds
30 seconds