Next steps
1. Install the
system
board.
2. Install thebattery.
3. Install the
base
cover.
4. Install the
microSD
card.
5. Follow the procedure in
Display assembly
Removing display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
Steps
1. Disconnect the EMR sensor cable [1].
2. Remove the single (M2.0x3.0) screw that secures the wireless bracket to the system board [2].
3. Lift the wireless bracket and disconnect the wireless antennas [3, 4].
50
Removing and Installing
after working inside your
computer.
before working inside your
computer.