Safe Embrace Convertible Car Seat
Adult assembly is required. No tools needed for assembly.
Please keep these instructions for future reference.
Before you assemble the pad to the shell and use
this car seat, please be sure that you take the time
to read and understand the Owner's Manual that
came with this car seat. Your child's safety
depends on you!
Please read these instructions and follow each
step to correctly assemble the pad the shell. After
you have completed pad assembly, refer back to
the Owner's Manual for complete information on
how to setup and install the car seat; and how to
restrain your child properly.
If you have any questions about this product,
please call Fisher-Price Consumer Affairs at
1-800-432-KIDS.
1
Connector
Bar Cover
• Open the connector bar cover on the back of the shell.
• Pull the connector bar up.
• Remove each shoulder strap from each end of the
connector bar, as shown.
Pad Assembly Instructions
Model Numbers: 79701, 79704
Shoulder
Straps
Connector
Bar
2
Buckle
• Remove the shoulder straps from the shoulder strap
slots on the front of the shell.
• Press the button on the buckle and remove the
shoulder straps from the buckle.
3
• Fit the top of the pad over the top edge of the shell.
Pad
Shell