Maintenance; Product Disposal - TERMA KTX 1 User Manual

INSTALLATION OF THE MS VERSION OF DEVICE
(WITHOUT THE POWER SUPPLY WIRE)
DEVICE DISASSEMBLY
1. Release the screw at the back of the controller casing.
2. Take off the casing.
3. In case of a radiator connected to a central heating system, close the
valves and remove the heating agent. For electric radiators – take it off
the wall and position it in such a way to prevent pouring the heating
agent out of the radiator during disconnecting the heating element.
4. Untwist the heating element using spanner no 24.

MAINTENANCE

1. Disconnect the device from electricity prior to cleaning.
2. Heating element control head should be cleaned with a dry or damp cloth with a very
small amount of detergents, which should never contain any solvents or abrasive
agents.

PRODUCT DISPOSAL

This product should not be disposed of as general waste but should be brought to the
appropriate collection point for recycling of electric and electronic devices. This informa-
tion is provided by the sign on the product, user manual and packaging. Information on
the appropriate point for used devices can be provided by Your local distributor or manu-
facturer of the product. Thank You for Your effort towards environment protection.