Create MP3 audio fi les
Use the home theatre to convert audio CDs into
MP3 audio fi les.
1
Insert an audio CD (CDDA/HDCD) into
the home theatre.
2
Connect a USB storage device to the home
theatre.
3
When audio is played, press CREATE MP3.
CREATE MP3
OPTIONS
Speed
Normal
Bitrate
128kbps
SUMMARY
Select Track
0
Time
00:00
Select All
Start
Exit
4
Select the conversion settings in the
[OPTIONS] panel, then press OK.
•
[Speed] : Selects the write-to-fi le
speed.
•
[Bitrate] : Selects the conversion
quality.
5
Press
to access the [TRACK] panel.
6
Select an audio track, then press OK.
•
[Select All] : Selects all tracks.
•
[
Deselect all] : De-selects all tracks.
7
Select [Start] in the menu to convert, then
press OK.
»
A new folder is created in the USB
storage device to store all the new MP3
audio fi les.
•
To exit the menu, select
press OK.
Note
•
During the conversion process, do not press
any buttons.
•
DTS CDs and copy-protected CDs cannot be
converted.
•
A write-protected or password-protected
USB storage device cannot be used to store
MP3 fi les.
12
EN
TRACK
Track01
04:14
Track02
04:17
Track03
03:58
Track04
04:51
Track05
03:53
Track06
04:09
Track07
04:38
Deselect All
[Exit] and
6
Change settings
This section helps you to change the settings of
your home theatre.
Caution
•
Many of the settings are already confi gured
with the best value for the home theatre.
Unless you have a specifi c reason to change a
setting, it is best to leave it at the default value.
1
Press
SETUP.
»
The following menu appears.
Symbol
Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2
Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theatre.
3
Press
BACK to return to the previous
menu, or press
SETUP to exit.
Note
•
You cannot change a setting that is greyed out.