Contents Product specifications Troubleshooting Notice Copyright About Progressive Scan 10 Index Trademarks Important Safety Product care Disposal of your old product and batteries Your home theater Main unit Remote control Connect your home theater Connectors Connect to the TV Connect audio from TV or other devices Connect a microphone Use your home theater Before you start...
Notice ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) Copyright content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage.
Your home theater Disposal of your old product and batteries Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your home theater at www. philips.com/welcome. Your product is designed and manufactured with...
Remote control (Navigation buttons) • Navigate menus. • In video mode, press left or right to fast backward or fast forward. • In radio mode, press left or right to search a radio station; press up or down to fine tune a radio frequency. INFO Displays information about what is playing.
TV and other devices. The basic connections of the home theater with its accessories are provided in the Quick Start. For a comprehensive AC MAINS~ interactive guide, see www.connectivityguide. Connects to the power supply. philips.com. SPEAKERS Connects to the supplied speakers and Note subwoofer. •...
(Cable not supplied) Connect audio from TV or other devices Option 2: Connect to the TV through Use your home theater to play audio from the YPbPr (component video) TV or other device such as a cable box. Note • The component video cable or connector •...
Use your home Change surround sound mode Experience an immersive audio experience with theater surround sound modes. This section helps you use the home theater to play media from a wide range of sources. Before you start Press SURR repeatedly to cycle through the available surround modes.
Use video options Use karaoke options Access several useful features while viewing Access several useful features while playing video. karaoke disc. Note Note • • Available video options depend on the video Ensure that a microphone (not supplied) is connected to the MIC connector on this home source.
Quick skip play to a specific time Note Quick skip to a specific part of a video by • If the USB storage device does not fit into the entering the time of a scene. connector, use a USB extension cable. INFO.
Button Action Connect a USB storage device to the home theater. Selects a preset radio station. When audio is played, press CREATE MP3. Searches for a radio station. Select [Yes] and press OK to confirm. Fine tunes a radio frequency. Press and hold to erase the CREATE MP3 preset radio station.
Change settings Change general settings Press SETUP. This section helps you to change the settings of your home theater. Select [General Setup], then press OK. Select and adjust the following settings: Caution • [Disc Lock] : Restricts play to disc. Password (PIN code) is required to •...
Change preference settings • [HDMI Audio] : Enables or disables HDMI audio output for the TV. • [Audio Sync] : Sets a delay for audio Press SETUP. output when you play a video disc. • [Prologic II Mode] : Selects a 5.1 Select [Preference Setup], then press OK.
Update software Product specifications To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site. Note • Specification and design are subject to change Check software version without notice.
Page 17
Video Speakers • • Signal system: PAL / NTSC System: full range satellite • HDMI output: 480i/576i, 480p/576p, 720p, • Speaker impedance: 8 ohm (center), 4 ohm 1080i, 1080p (Front/Rear) Audio • Speaker drivers: 3” full range • • Sampling frequency: Frequency response: 150 Hz-20 kHz •...
Page 18
Ensure that the [HDMI Audio] is enabled. support at www.philips.com/welcome. No sound from TV program. If you contact Philips, you will be asked for the • Connect an audio cable from the audio model and serial number of your product. The...
Page 19
10 Index The contents of a USB storage device cannot be read. • Ensure that the format of the USB storage device is compatible with the home theater (see ‘Product specifications’ on page 16). amplifier • Ensure that the USB storage device audio is formatted with a file system that is connection...
Page 20
overview time search video troubleshooting connectors main unit remote control audio from TV 9, 13 connect password picture slide show play troubleshooting software update play disc options radio video troubleshooting options USB storage device settings product care synchronize with audio product specifications progressive scan radio...