Sound; Hdmi Audio; Language; Scan Your Usb Storage Device - Philips CSS5123/93 Quick Start Manual

Video setting
Adjust the video output.
1
Press (Home).
2
Select [Setup], and then press
3
Select [Video] > [Video Setting], and then
press .
4
Adjust the settings.
5
Press to confirm.

Sound

Change the sound settings to suit your preference.

HDMI audio

To hear an HDMI audio output from your TV,
connect your SoundBar to the TV through an
HDMI cable.
1
Press (Home).
2
Select [Setup], and then press
3
Select [Audio] > [HDMI Output], and then
press .
4
Select the following options, and then press
:
•
[PCM]: Switch audio output to stereo.
• [RAW]: Output original DTS or Dolby
audio.
Night mode
For quiet listening, decrease the volume of loud
sounds when you play audio. Night mode is only
available for Dolby-encoded audio.
1
Press (Home).
2
Select [Setup], and then press
3
Select [Audio] > [Night Mode] > [On], and
then press .
EN
22

Language

Select a language for the home menu and subtitles.
.
Home menu
1
2
3
4
Video subtitle
1
2
3
4
.

Scan your USB storage device

Scan the USB storage device connected to your
SoundBar to browse the media files.
Automatic scan
Automatically scan the USB storage device
connected to your SoundBar.
1
2
3
.
Rescan
Rescan the USB storage device connected to your
SoundBar or stop scanning.
1
2
3
Press (Home).
Select [Setup], and then press
Select [System] > [Menu Language], and
then press .
Select a menu language, and then press
Press (Home).
Select [Setup], and then press
Select [System] > [Subtitle], and then press
.
Select a subtitle language for your video, and
.
then press
Press (Home).
Select [Setup], and then press
Select [System] > [Auto Scan] > [Auto scan
on], and then press
Press (Home).
Select [Setup], and then press
Select [System] > [Scan Storage] > [Rescan
Storage]/ [Stop Scanning Storage] , and then
press .
.
.
.
.
.
.