Option 1: Connect to HDMI socket
HDMI
OUT
1
Connect a HDMI cable (supplied) from the
HDMI OUT on this unit to the HDMI IN
socket on your TV.
Note
•
The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
Tips
•
To optimise the video output, see chapter 'Adjust
settings' > [ Video Setup ] > [ Advance Picture ]
for details.
•
This unit is HDMI CEC compatible. It enables
connected TV/device to control each other over
HDMI, see chapter 'Activate EasyLink control' for
details.
•
Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
•
To route the audio from your TV to this DVD Home
Theatre unit, connect an audio cable from the audio
input on this unit to the audio output on your TV.
•
This type of connections provide best picture quality.
Option 2: Connect to Scart socket
HDMI IN
1
Connect a scart cable (supplied) from the
SCART OUT (AUX-SCART) socket on
this unit to the scart input socket on your
TV.
•
To listen to the audio output from your TV, press
AUX/DI /MP3 LINK repeatedly until 'AUX SCART'
is displayed on the display panel.
•
This type of connections provide good picture
quality.
SCART OUT
(AUX-SCART)
Tips
SCART
EN
13