[ Ambisound Setup ]
Change the Ambisound setup.
Options
Descriptions
[ Setup
Select this if you want to
Guide ]
go through the complete
Ambisound settings.
[ Room
Select the type of walls
Acoustics ]
that surround your room.
[ Room
Select this unit placement
Placement ]
in the room.
[ Height ]
Select the height at which
this unit is placed.
[ Listening
Select the distance
Position ]
between your listening
position and this unit.
Tips
•
See chapter 'Get Started - Start Ambisound setup'
for detailed information.
[ HDMI Audio ]
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
•
[ On ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmixed to
two-channel sound (linear-PCM).
•
[ Off ] – disable audio output from
your TV. The sound is only output
through this speaker system.
[ Night Mode ]
Make loud sound level softer and soft
sound level louder so that you can watch
the DVD movies at a low volume, without
disturbing others.
•
[ On ] – for quiet viewing at night
(DVDs only).
•
[ Off ] – enjoy surround sound with a
full dynamic range.
EN
41