Philips HTS6120/98 User Manual page 11

Tip
•
If the TV has a DVI connection only, connect
via a HDMI/DVI adaptor. Connect an audio
cable for sound output.
•
You can optimize the video output. (see 'Adjust
settings' > 'Video setup' > [HDMI Setup] ).
•
This type of connection provides the best
picture quality.
Option 2: Connect to the component
video jack
1
Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
• If a progressive scan TV is used, you
may turn on the progressive scan
mode. (see 'Get started' > 'Turn on
Progressive Scan').
Note
•
The component video input jack on the TV
might be labeled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture
quality.
Option 3: Connect to the Video
(CVBS) jack
1
Connect a composite video cable to the
VIDEO OUT jack on this Home Theater
System and the VIDEO input jack on the
TV.
Note
•
The video input jack on the TV might be
labeled as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
•
This type of connection provides standard
picture quality.
EN 11