Advertisement
6.
MAintEnAncE
WArninG! Disconnect die grinder from air supply before changing accessories, servicing or performing
maintenance. Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
6.1.
If the air supply does not have an oiler, lubricate the air die grinder daily with a few drops of Sealey air
tool oil dripped into the air inlet to prolong its life.
6.2.
Clean the die grinder after use.
6.3.
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or type of hose
connectors. To remedy check the air supply and follow instructions in chapter 3.
b) Grit or gum deposits in the die grinder may also reduce performance. If your model has an air
strainer (located in the area of the air inlet), remove the strainer and clean it. Flush the die grinder
out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin. Allow to dry before use.
6.4.
For a full service contact your local Sealey service agent.
6.5.
When not in use, disconnect from air supply, clean die grinder and store in a safe, dry, childproof
location.
WArninG! The grinding process can produce streams of sparks (especially when grinding metal), which
are a potential source of ignition.
do not use the grinder where there are flammable liquids, solids or gases.
do not allow grinder sparks to make contact with the operator's clothing or any other fabric such as
cleaning rags. Fabrics contaminated with inflammable materials such as petrol, oil, grease, paint and
solvents are a particular fire hazard.
To reduce the risk of clothing catching fire the operator should wear wool or cotton outer garments treated
with a fire retardant in preference to man-made fibres.
recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
When the product becomes completely unserviceable and requires disposal, drain off any
fluids (if applicable) into approved containers and dispose of the product and the fluids
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
iMPortAnt: No liability is accepted for incorrect use of this product.
WArrAnty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inforMAtion: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name
and address, including postcode.
© Jack Sealey Limited
danger of fire/Explosion Hazard
EnVironMEntAL ProtEction
which is compatible with the environment.
according to local regulations.
email sales@sealey.co.uk or phone 01284 757500.
Sole uK distributor,
Sealey Group, Kempson Way,
Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
01284 757500
www.sealey.co.uk
sales@sealey.co.uk
01284 703534
SA654.V3
Issue: 2(SP) - 15/07/14
Advertisement
