Subscribe to Our Youtube Channel
Related Manuals for Sealey 160XT.V2
Summary of Contents for Sealey 160XT.V2
- Page 1 INSTRUCTIONS FOR: ARC WELDERS 140XT.V2 MODELS N 160XT.V2 Original Language Version 140XT.V2, 160XT.V2 Issue: 1 - 16/04/14 © Jack Sealey Limited...
- Page 2 Device (RCD) is used. It is particularly important to use an RCD with portable products that are plugged into a supply which is not protected by an RCCB. If in any doubt consult a qualified electrician. You may obtain a Residual Current Device by contacting your Sealey dealer.
- Page 3 3. SPECIFICATION Model No: ............140XT.V2 Model No: ............160XT.V2 Welding Current:..........45-140A Welding Current: ..........55-160A Electrode Capacity: ........Ø1.6-3.2mm Electrode Capacity: ........
- Page 4 6.5.3. To strike the arc tap the electrode lightly on the workpiece as if striking a match. DO NOT hit the electrode on workpiece as this may damage the stick. Original Language Version 140XT.V2, 160XT.V2 Issue: 1 - 16/04/14 © Jack Sealey Limited...
- Page 5 However, metallic components bonded to the workpiece will increase the risk that the operator could receive a shock by touching these metallic components and the electrode at the same time. The operator should be insulated from all such bonded metallic components. Original Language Version 140XT.V2, 160XT.V2 Issue: 1 - 16/04/14 © Jack Sealey Limited...
- Page 6 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Need help?
Do you have a question about the 160XT.V2 and is the answer not in the manual?
Questions and answers