Advertisement
English
•
Keep children and animals at a safe
distance when using this appliance.
•
Always work from bottom up when
using the appliance on stairs, and keep
the appliance at least a stair below your
working position.
•
Always be aware of the position of the
power cord and hose while using the
appliance.
•
Do not use the appliance without the
suction head or another suitable
accessory mounted to the tube.
•
After use, fully rewind the power cord
and store the appliance in a tidy
manner.
•
Keep your hair, clothing and gloves
away from moving parts.
•
Do not use damaged accessories.
•
Use only Black & Decker accessories.
Features
This appliance includes some or all of the
following features:
1. Hose handle
2. Variable suction control
3. On / Off button
4. Cord rewind button
5. Bag full indicator
6. Hose connector
7. Carrying handle
8. Flexible hose
9. Telescopic tube
10. Power cord
11. Floor Head
12. Brush actuator
13. Tool storage
14. Tool storage latch
15. Dust bag compartment
16. Dust bag compartment latch
17. Floor brush
18. Brush / Crevice tool
19. Exhaust filter
20. Cloth bag
21. Cloth bag clip
22. Bag adapter
23. Pre motor filter
24. Exhaust grill
Assembly
Adjusting the length of the tube (Fig B)
•
The extension tube can be adjusted as
follows.
•
Push the button on the tube forward and
slide the lower tube out.
•
Release the knob.
Connecting the hose (Fig.C)
•
Insert the hose (8) into the hose
connector (6) of the appliance.
•
Push the hose until the release buttons
click into place.
•
To disconnect the hose, press the
release buttons and pull out the hose.
Connecting the tube to the handle (Fig. D)
•
Push the hose handle (1) into the flared
end of the tube (9).
•
To remove the tube, pull the handle out
of the tube.
Mounting the floor head (Fig. E)
The floor head (11) allows for vacuuming on
carpet and hard surfaces (e.g. laminate and
tiles).
•
Push the tube (9) into the head (11).
•
To remove the head, pull the tube out of
the head.
-6-
Advertisement
