Manual Installation; Give Name; Favourite Programmes - Philips 28PW8608/12 Handbook

Manual installation

This menu is used to store the programmes
one at a time or to add a programme to the
existing list.
From the
Installation
and Ê at the same time) :
& Select
Manual installation
the up/down cursor to select and the left/right
one to adjust :
INSTALLATION
Manual installation
Menu language
Country
Automatic installation
(Selection mode)
B Manual installation
B System

Give name

Programme no.
Reshuffle
Search

Favourite programmes

Fine tune
SETUP
Store
é
(only available in certain
Selection mode
countries) : permits selection of search mode
by or by
Frequency Channel
"
select
System : Western Europe
Give name
This menu allows you to change or give a
name to the programmes and external
connectors. From the
(to select press ¢ and Ê at the same time) :
& Select
and press
Give name
é Select the programme with the up/down
cursor and validate with
" Use the left/right cursor to move around the
Favourite programmes
This menu allows you to select the
programmes to be accessed with the
key. From the
Installation
press ¢ and Ê at the same time) :
& Select
Favourite Programmes
The list of favourite programmes is displayed.
The programmes that were stored at
installation will automatically appear on this list.
Setup Menu: see page 11
menu (to select press ¢
u
and press . Use
Æ
.
(BG
menu
Installation
u
.
u
.
@ #
P
menu (to select
u
and press .
standard),
Eastern Europe
(I standard) or
Great Britain
standard).
'
Programme number :
number using only the left/right keys.
u
(
press .The search starts. Once a
Search :
programme is found, the scanning stops and
the name of the programme is displayed
(when available). Go to the next step. If you
know the frequency of the required
programme, this can be entered directly using
0 9
the to keys.
If no picture is found, see Tips (p. 12). See also :
EasyLink Function page 7.
§
if reception is poor, adjust using
Fine Tune :
the left/right cursor.
u
è
press .The programme is stored.
Store :
! Repeat steps ' to è for each programme to
store.
H
ç To exit, press
several times.
name display area (5 characters).
' Use the up/down cursor to select the
characters.
u
( Press
when the name has been entered.
The programme name is stored.
§ Repeat steps é to ( for all programmes or
connectors to be named.
H
è To exit, press
several times.
é Use the up/downcursor to select the required
programme.
" Use the left/right cursor to add or remove a
programme from the list.
' Run through steps é and " for each
programme to be added or removed from the
list.
H
( To exit, press
several times.
(DK standard),
(LL'
France
enter the required
5