Installing Your Television Set; Remote Control; The Keys On The Tv Set - Philips 28PW8608/12 Handbook

Installing your television set

&
Positioning your television set
5 cm
5 cm
Place your TV on a solid, stable surface. To
avoid accidents, do not expose the set to
water and do not place anything on the set
such as a cloth (mat), a container full of liquid
(vase) or a heat source (lamp).
é
Connections
• Insert the aerial plug into the
at the rear of the set.
• Insert the mains plug into the wall socket
(220-240 V / 50 Hz).
To prevent damaging the mains (AC) cord which
could cause of fire or electric shock, do not place
the TV on the cord.

The keys on the TV set

M
-
2
5 cm
:
connector
P
+ - +
VOLUME MENU PROGRAM
"

Remote control

Insert the 2 R6-type batteries (supplied)
making sure that they are the right way round.
For environmental reasons the batteries supplied
with this appliance do not contain mercury or
nickel cadmium. Please do not discard your used
batteries, use available recycling facilities (consult
your dealer on this).
'
Switching on
To switch on the set, press the on/off key. The
indicator comes on and the screen lights up.
If the television remains in standby, press
on the remote control. Go straight to page 4.
The indicator will flash when you use the remote
control.
Depending on the model, the television set has 4 or
5 keys located on the front or the top of the set.
"
The (- +) keys are used to adjust the
VOLUME
sound levels.The
PROGRAM
to select the required programmes.
The key (for 5 key versions), allows you
M / MENU
to select ,
Volume Brightness
Then use the - + to make the adjustment.
P
Note: when the
Childlock
these keys are unavailable (see page 6).
#
P
(- +) keys are used
P
, and .
Colour Contrast
function is activated,