Table Of Contents; Safety Information; Filtration System Working Princples; Preparation Before Installation - Tebas MINI Saturn Owners Manual & Instruction

Table of content
Safety information ...................................................................... 7
Filtration system working princples ........................................ 7
Preparation before installation ................................................. 7
How to install .............................................................................. 7
Installation notes ........................................................................ 9
Initial start-up.............................................................................. 9
Valve functions ........................................................................... 9
Spare parts.................................................................................. 10

Safety information

1. The sand filters are designed to work with water at temperature 0-45ºC. The filter should never be operated outside
of these temperatures or damage may occur.
2. The installation should be carried out in accordance to the safety instructions of swimming pools and the specific
instructions for each facility.
3. The user should make sure that the installation is carried out by qualified authorized persons and that these
persons have first carefully read the following instructions. Incorrectly installed equipment may fail, causing severe
injury or property damage.
4. The operating safety of the filter is only guaranteed if the installation and operation instructions are correctly
followed.
5. To reduce the risk of injury, do not permit children to use this product.
6. Chemical spills and fumes can weaken swimming pool. Corrosion can cause filters and other equipment to fail,
resulting in severe injury or property damage. Do not store pool chemicals near your equipment.
7. Any modification of the filter requires the prior consent from the supplier's original replacement parts and
accessories authorized by the manufacturer ensure a high level of safety. The supplier assumes no liability for the
damage and injuries caused by unauthorized replacement parts and accessories.
8. In the event of defective operation or fault, contact the supplier or its nearest authorized service agent.
Filtration system working principles
Incoming water from the piping system is automatically directed by the 4-way valve to the top of the filter bed. As the
water is pumped through the filter sand, dirt and debris are trapped by the filter bed, and filtered out. The filtered water
is returned from the bottom of the filter tank, through the 4-way valve and back through the piping system.

Preparation before installation

1. Position the filter as close to the swimming pool.
2. The filter should be placed on a level concrete slab, very firm ground, or equivalent. Ensure that the ground will not
subside, preventing any strain from the attached plumbing.
3. Position the filter under consideration of the piping connections, so that it is convenient for operating and servicing.
4. Ensure that the compliance label is facing the front to allow easy identification in the case of service difficulties.
How to install MINI Saturn filtration system
1. Mount the pump to sand filter support by using bolts and nuts.
14-inch sand filter base
The pump must be screwed to the holes marked with the number „2".
7