Before You Begin - Kohler K-1106 Installation Manual

Before You Begin

NOTICE: Do not lift the whirlpool by the piping or pump, or use the piping or pump for structural
support of the whirlpool. To avoid damage to the whirlpool, lift at the sides of the whirlpool.
NOTICE: Do not support the load weight of the whirlpool by the perimeter of the rim. The rim perimeter
must be adequately supported, but must not support the load weight of the whirlpool.
For whirlpools without an apron, a drop-in installation is necessary. For whirlpools with integral or
optional apron, an alcove or corner installation is recommended, depending upon the model chosen.
Inspect the whirlpool for damage before you begin installation.
You must install this whirlpool to an adequately supported, level subfloor.
Confirm adequate mounting and connection space for the faucet specified for your installation.
For corner units with integral apron: Have a qualified electrician install the outlets for the pump
and heater (if used) at the specified location on the whirlpool. Refer to the above illustration.
Kohler Co. reserves the right to make revisions in the design of products without notice, as specified
in the Price Book.
Kohler Co.
Install the outlets for
the pump and heater
(if used) to the
mounting plate.
Outlet
5 1011092-2-E