Advertisement
Brief operation instructions
Insert the power plug into the power line socket and insert the antenna plug into the antenna
socket on the rear panel. Press down the power switch of the TV set. The red indicator light
goes on. Follow the steps below.
A．Program preset
1. Auto searching and storing program
Press MENU or TUN to enter the Search Menu. Press Program up/down buttons to select
COLOR SYSTEM and SOUND SYSTEM. Press VOLUME buttons to select the system.
Press Program up/down buttons to select AUTO SEARCH and press VOLUME buttons to
search automatically. When the search finishes, all the programs will be stored
automatically and the TV returns to normal status.
2. Manual search and fine tune
Press MENU or TUN repeatedly to enter the Search Menu. Press Program up/down
buttons to select COLOR SYSTEM and SOUND SYSTEM. Press VOLUME buttons to
select the system. Press Program up/down buttons to select FREQUENCY RANGE and
PROGRAM NUMBER. Press VOLUME buttons to set and Program up/down buttons to
select MANUAL CHANNEL SEARCHING. Press VOLUME buttons to search manually.
When the search finishes, all the programs will be stored automatically and the TV returns
to normal status. If the effect is not good, press Program up/down buttons to select FINE
TUNE and press VOLUME buttons until the optimum effect is achieved.
3. Deleting channel number
Press MENU or TUN repeatedly to enter the Search Menu. Press Program up/down
buttons to select SKIP. Press VOLUME buttons until the OFF item lights. Now the
program number is deleted. Repeat the above steps, when the item lights, the deleted
program number can be resumed.
B．Volume tuning
Press VOLUME buttons to increase or decrease the volume.
C Personal preference setting
1. Picture effect
Press P.STD repeatedly to change among PERSONAL, STANDARD, DYNAMIC, SOFT
and NATURAL.
2. Sound effect
Press S.STD repeatedly to change among PERSONAL, STANDARD, MUSIC, FILM and
LANGUAGE.
11
Advertisement
