Operation; Changing The Bulbs; Changing The Fuse - KERN OZB-IF User Instructions

4 Operation

1. Connect the power plug to the power outlet.
2. Power on the device by pressing the main switch.
3. Bend the flexible goosenecks in order to point the LED lights in the
preferred direction.
4. Select the preferred light intensity by turning the rotary dimmer.

5 Changing the bulbs

Please contact the KERN Optics Technical Service.

6 Changing the fuse

The fuse housing is on the rear of the illumination unit next to the mains power
supply entry. With the device switched off and unplugged, you can screw out the
housing. When doing this, it is helpful to use a screwdriver or similar tool. The
defective fuse can be removed from its housing and be replaced with a new one.
After that, you just need to insert the fuse housing back into the insertion point.
OZB-A4515-BA-e-1810 6