KERN OZB-IF User Instructions

Gooseneck illumination

Advertisement

Quick Links

User instructions
Gooseneck illumination
KERN
OZB-IF
Version 1.0
01/2018
OZB-A4515-BA-e-1810
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@kern-sohn.com
OZB-A4515
Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OZB-IF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KERN OZB-IF

  • Page 1 KERN & Sohn GmbH Ziegelei 1 Tel: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@kern-sohn.com Internet: www.kern-sohn.com User instructions Gooseneck illumination KERN OZB-IF OZB-A4515 Version 1.0 01/2018 OZB-A4515-BA-e-1810...
  • Page 3: Table Of Contents

    KERN OZB-A4515 Version 1.0 01/2018 User instructions Gooseneck illumination Table of contents Before use ..................3 Notes on the electrical system ....................3 Storage ............................3 Nomenclature ................4 Technical data / Features ............5 Operation ..................6 Changing the bulbs..............6 Changing the fuse ................
  • Page 4: Before Use

    1 Before use 1.1 Notes on the electrical system Before connecting to a mains power supply, you must make sure that you are using the correct input voltage. The information to select the correct mains cable is located on the device, on the rear of the product directly above the cable entry. You must comply with this information.
  • Page 5: Nomenclature

    2 Nomenclature Goosenecks Mains cable LED lights Housing Rotary dimmer Main switch OZB-A4515-BA-e-1810...
  • Page 6: Technical Data / Features

    3 Technical data / Features Product dimensions: 120x370x250 mm Packaging dimensions: 300x250x250 mm Net weight: 1,5 kg Gross weight: 2 kg Input voltage: AC 100-240V, 50-60Hz Fuse: 2A 5x20mm OZB-A4515-BA-e-1810...
  • Page 7: Operation

    4. Select the preferred light intensity by turning the rotary dimmer. 5 Changing the bulbs Please contact the KERN Optics Technical Service. 6 Changing the fuse The fuse housing is on the rear of the illumination unit next to the mains power supply entry.
  • Page 8: Service

    The device may only be opened by trained service engineers who have been authorised by KERN. 8 Disposal The packaging is made of environmentally-friendly materials, which you can dispose of at your local recycling centre.

Table of Contents