Table of Contents
Advertisement
Removing / Assembling
the Doors
When it is necessary to move the refrigerator
through a narrow opening, removing the doors is the
recommended procedure.
WARNING
If your entrance door is too narrow for the refrig-
erator to pass through, remove the refrigerator
doors and move the refrigerator sideways
through the doorway.
Use two or more people to remove and install
the refrigerator doors. Failure to do so can result
in back or other injury.
Disconnect the electrical supply to the refrigera-
tor before installing. Failure to do so could result
in serious injury or death.
Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator. You may
be injured or receive an electrical shock.
Be careful when handling the hinge and stopper,
to avoid injury.
Remove food and bins before detaching the
doors and drawers.
Removing Freezer Door
1
Gently pry off the Top Hinge Cover with a flat
head screwdriver and remove it.
2
Using 3/8 inch (10 mm) socket wrench, remove
the three bolts and lift the Top Hinge. Set parts
aside.
3
Lift freezer door slightly and remove it. Set parts
aside.
Middle Hinge Bracket
Removing Refrigerator Door
1
Loose and remove the two bolts and the screw to
remove the middle hinge bracket from refrigerator
housing.
Middle
Hinge Bracket
2
Set parts aside.
3
Lift up door slightly and remove it.
To replace doors, begin with refrigerator door and
then follow with freezer door.
INSTALLATION
10
Hinge Pin
Advertisement
Table of Contents
