Installing The Microsd Card - Velleman CAMIP16 Quick Installation Manual

2 mp solid light ir varifocal bullet ip camera

Hide thumbs

Table of Contents

Available languages

Focal Length Selection and Focus

Adjustment

Notes:



We recommend adjusting the focal length and focus at an ambient

temperature between 0 and 40 °C.



Finish the adjustment as quickly as possible (max. 10 minutes) to

prevent that excess humidity builds up inside the camera, and the

desiccant absorbs too much moisture and is unable to keep the camera

dry.



Avoid adjusting in a high moisture environment. If this is not possible,

then finish the adjustment as quickly as possible.

To adjust focal length and focus, proceed as follows:

Open the front cover [5] of the camera by rotating it counter-clockwise.

Inside the camera, you see two handles to adjust the focal length [6]

and focus [7].

Loosen the screw of the handle, rotate to adjust, then tighten the screw

again.

Find the fresh desiccant (incl.) and place it in the camera as shown in

the illustration [8].

Immediately place back the front cover of the camera and turn it clock-

wise to fasten it.

Note: Make sure the front cover is fastened well to prevent moisture

from entering the camera.

Slide the sun shield over the camera [9].