Morphy Richards Accents Instructions For Future Use page 5

CM210002 MUK Rev3.qxp_Layout 1 23/03/2017 15:54 Page 5
Using the Frothing Programmes
To heat and froth, press the Power/Function
Button (6) once. The button will illuminate
RED and begin heating and frothing.
To stop mid-cycle, press the Power/Function
Button (6) again. There will be
30 second wait time
can be restarted.
1
x1 press.
Red light.
3
x1 press.
Wait 30 secs
before restart.
approximately
before the programme
It takes approximately 2 minutes to heat
and froth your milk to a temperature of
65°C. When the programme has finished,
the frother will automatically switch off.
It is recommended that the jug is rinsed out
immediately after each use. Always clean
the Jug (5) before using again.
For cold frothing, ensure the Frothing Whisk
(14) is attached to the Stirring Arm
double press the Power/Function Button
(6). The button will illuminate BLUE and
begin frothing. To cancel the programme
mid-cycle, press the Power/Function
Button again.
2
Approx.
2 mins to 65°.
4
x2 press.
Blue light.
(13) and
5