Installing Your Tv-Video Combi; Preparation For Use; Decoder Allocation - Philips 14PV360/07 Instruction Manual

Philips tv-video combi instruction manual
Hide thumbs Also See for 14PV360/07:
Table of Contents

Advertisement

3. Installing your TV-Video Combi

Preparation for use

1.
1.
After you have connected the aerial or cable,
confirm the picture on the TV screen with
.
B 1
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
2.
2.
The automatic TV channel search starts.
This picture will appear on the screen.
PLEASE WAIT
START
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will
appear on the TV screen.
3.
3.
'TIME' and 'DATE' will appear on the TV
screen.
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
4.
4.
Check 'TIME'. If required, please change the
time with the number buttons
5.
5.
Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6.
6.
When all information is correct, save by
pressing
STATUS/EXIT
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
FINISH
.
0..9
.

Decoder allocation

Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
,
1.
1.
Use
or
P+
P-
nel which you would like to allocate the
decoder to.
2.
2.
Press
. The main menu will appear.
MENU
3.
3.
Use
to select 'TUNER SET UP'.
K B
L C
Then press
B 1
4.
4.
Use
to select 'MANUAL TUNING'.
K B
L C
Then press
B 1
5.
5.
Use
to select 'DECODER'.
K B
L C
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
6.
6.
Use
to select 'ON'
B 1
(Decoder switched on).
How can I switch off the decoder?
Use
to select 'OFF' (Decoder switched
B 1
off).
7.
7.
To end, press
STATUS/EXIT
The decoder has now been allocated to this TV
channel.
5
to select the TV chan-
0..9
.
.
P55
055
[OFF]
[OFF]
.
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

14pv365/0714pv36014pv365

Table of Contents