Download Print this page

Advertisement

Available languages

Available languages

Quick Links

Battery Unit BUM100S/150S/300S Instruction Manual
• This manual contains important information regarding the safe use of the BUM100S/150S/300S. Please
read these instructions before installing and/or using the product.
• Please connect and install the battery unit only after having fully understood the relevant procedures for
the Backup Power Supply, found in the Backup Power Supply Instruction Manual.
Safety precautions
• The safety symbols used in this manual are explained below.
Warning
Caution
: Indicates a prohibited action (something you must not do). For example,
disassembly is prohibited.
: Indicates a necessary action (something you must do). For example,
is necessary.
Note that some items described as cautions may result in more serious damage under certain conditions.
The information described here is very important and must be strictly observed.
Do not disassemble, repair, or modify the product.
• Doing so may cause an electric shock or a fi re.
If liquid leaks from the product, do not touch it.
• Doing so may cause blindness or burns.
• If it touches your eyes or skin, wash it out with lots of clean water and consult your doctor.
Do not use this product in applications which require an extremely high degree
of reliability and safety, such as those listed below.
(This product is designed and manufactured for use for OA equipment such as personal computers.)
• Medical equipment or system that may cause death directly
• Applications that directly affect the safety of people. (For example, the operation and control of cars and elevators.)
• Applications in which failure may signifi cantly damage or impact the society and public. (For example, important com-
puter systems or communication equipment.)
• Applications with the same level of importance as those described above.
Two or more people should work together to carry, unpack and install the
BUM300S.
● Because the unit is heavy, you may injure yourself or drop the unit, or it may fall over.
Product weights are 20.5 kg (BUM100S), 21.5 kg (BUM150S), and 43.5kg (BUM300S).
Carefully consider the weight when unpacking/transporting this product.
• Injury may result if the unit falls or is dropped.
• If you drop the unit, stop using it and have it inspected and repaired. For information about repairs, contact us
at __________.
stic bags out of the reach of children.
Keep pla
• Children may suffocate if they put their heads into plastic bags.
This manual contains important information regarding the
safe use of this product.
Please read these instructions before installation and/or use.
Indicates an imminently hazardous situation which, if not handled
properly, may result in death or serious injury.
Indicates a potentially hazardous situation which, if not handled
properly, may result in injury or property damage.
* Property damage means damage to houses/household effects, livestock, and pets.
Warning
Warning (product use)
Caution (installation)
1
indicates that
indicates that grounding

Advertisement

loading
Need help?

Need help?

Do you have a question about the BUM100S and is the answer not in the manual?

Questions and answers

Summary of Contents for Omron BUM100S

  • Page 1 Battery Unit BUM100S/150S/300S Instruction Manual • This manual contains important information regarding the safe use of the BUM100S/150S/300S. Please read these instructions before installing and/or using the product. • Please connect and install the battery unit only after having fully understood the relevant procedures for the Backup Power Supply, found in the Backup Power Supply Instruction Manual.
  • Page 2 Use a specifi ed battery for replacement. • Using a battery other than that which is specifi ed may cause a fi re. • Product models: BP100XS (Replacement battery pack for BUM100S) BP150XS (BUM150S (2 required)/BUM300S (4 required) Do not replace the battery in a place where there is fl ammable gas.
  • Page 3 Caution (battery replacement) Do not drop the battery or expose it to strong impact. • Doing so may cause the battery to leak dilute sulfuric acid. Do not short the battery with metal objects. • Doing so may cause an electric shock, fi re or burn. •...
  • Page 4: Consignes De Sécurité

    • Ce manuel contient des informations importantes concernant l’utilisation en toute sécurité du BUM100S/150S/300S. Veuillez lire attentivement ces instructions avant d’installer et/ou d’utiliser le produit. • Ne brancher et installer l’unité de batterie qu’après avoir parfaitement compris les procédures pertinentes pour l’alimentation de secours qui sont indiquées dans le manuel d’instructions sur l’alimentation de secours.
  • Page 5 • Comme l’appareil est lourd, vous risquez de vous blesser, de l’échapper, ou il peut tomber. Les poids du produit sont de 20,5 kg (BUM100S), 21,5 kg (BUM150S) et 43,5 kg (BUM300S). Faire attention au poids lors du déballage / transport de ce produit.
  • Page 6 Utiliser une batterie spécifi ée lors du remplacement. • L’utilisation d’une batterie autre que celle spécifi ée peut provoquer un incendie. • Modèles des produits : BP100XS (batterie de rechange pour BUM100S) BP150XS (BUM150S (2 requises) / BUM300S (4 requises)) Ne pas remplacer la batterie en présence de gaz infl...
  • Page 7: Unpacking The Product

    • Comme l’appareil est lourd, vous risquez de vous blesser, de l’échapper, ou il peut tomber. Les poids du produit sont de 20,5 kg (BUM100S), 21,5 kg (BUM150S) et 43,5 kg (BUM300S). Faire attention au poids lors du déballage / transport de ce produit.
  • Page 8: Installation

    Install the additional battery unit. Do not use this unit in any position other than the correct positions indicated in the illustration below. ● For BUM100S/BUM150S Correct positions Incorrect positions * Do not place the UPS or the additional battery unit on top of each other.
  • Page 9 ● For BUM300S Correct Positions Be careful not to get your fingers caught when arranging the unit. Caster at the bottom may be removed when sitting horizontally. Incorrect Positions * Do not place the UPS or the additional battery unit on top of each other. The upper unit may fall down by vibration etc.
  • Page 10 Installation de l’unité de batterie supplémentaire. Ne pas utiliser cet appareil dans toute position autre que les positions correctes indiquées sur l’illustration ci-dessous. ● Pour le BUM100S/BUM150S Positions correctes Positions incorrectes * Ne pas placer l'ASC ou l'unité de batterie supplémentaire au dessus l'une de l'autre.
  • Page 11 ● Pour le BUM300S Positions correctes Faire attention à ne pas se coincer les doigts lors de l'installation de l'appareil. Les supports inférieurs peuvent être retirés en position horizontale. Positions incorrectes * Ne pas placer l'ASC ou l'unité de batterie supplémentaire au dessus l'une de l'autre.
  • Page 12 Also remove the screws on the lower part of the signal card expansion slot cover. ➁ (2) Attach the clamps to the rear of the UPS and the BUM100S using 2 screws each. For now, loosen the screw that fastens Attach with 2 screws the cable clamp and holds the cable.
  • Page 13 2-2-2 BUM150S connection procedure / Connectable UPS : BU150SW (1) Connect the end of the battery cable connected to the back of the BUM150S to the UPS additional bat- tery connector and additional battery signal connector. When a 1050W device is connected, the backup time is 20 minutes (initial battery value at an ambient temperature of 20°C).
  • Page 14: Replacing The Battery

    The battery can be replaced while the UPS is stopped. (power supply output stopped) Caution When an additional battery unit (BUM100S/BUM150S/BUM300S) is connected to the UPS, replace the UPS battery when replacing the batteries of the additional battery unit. You cannot perform battery replacement of the additional battery unit only.
  • Page 15 Additional battery unit (BUM100S/BUM150S) replacement procedure For information on UPS battery replacement procedure, refer to the UPS instruction manual. Use a screwdriver to loosen (anti-clockwise rotation) the 2 screws at the top of the front panel of the additional battery unit until they turn freely. (The screws cannot be removed from the front panel.) Pull the front panel towards you to remove it.
  • Page 16 Insert 2 new battery packs into the additional battery unit as far as they will go. ➀ ● Replacement battery pack For BUM100S : Model number BP100XS (2 required) For BUM150S : Model number BP150XS (2 required) Attach the plate cover.
  • Page 17 Securely connect the connectors. ➀ Secure the connectors to the plate cover. ➁ You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s operation is stopped, but this sound is not abnormal. Use the 3 supports on the plate cover to secure the connectors.
  • Page 18 Additional battery unit (BUM300S) replacement procedure For information on UPS battery replacement procedure, refer to the UPS instruction manual. Use a screwdriver to loosen (anti-clockwise rotation) the 4 screws on the front panel of the additional battery unit until they turn freely. Loosen the 4 screws.
  • Page 19 Remove the 4 battery packs by pulling on the pullout label at the bottom of each battery pack. Caution Do not hold the connector of cable of the battery pack. Attention Red tape Ne pas tenir le connecteur du câble de la batterie. Use the red tape on top of the battery pack, Battery connector which is 10 cm from the inner edge of the battery,...
  • Page 20 Securely connect the connectors. ➀ Secure the connectors to the plate cover. ➁ You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s operation is stopped, but this sound is not abnormal. Use the 2 supports at the top and bottom of the plate cover to secure...
  • Page 21 <After replacing the battery during operation...> Press the beep stop/test button for 5 to 10 seconds, to perform a self-diagnostic test. Normal operation resumes after the test for about 10 second. If the beeping sounds, the beeping stops at the fi rst press of the button and starts test in the second press of the button. If the battery replacement indicator is ON and beep sounds before replacing the battery, the indicator is OFF and beep stops after test completion, and normal operation resumes.
  • Page 22 Dimensions   B UM100S/BUM150S ● <Unit: mm/Tolerance: ±1mm> screw ●  BUM300S <Unit: mm/Tolerance: ±1mm> BUM300S K1L-D-05096G...

This manual is also suitable for:

Bum150sBum300s