ELPRO DVIDEC100 Manual

4x1 dvi switcher & high resolution scaler

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

DVIDEC100

• 4 selectable DVI inputs with associated audio

•

"Through Blank" switching on DVI output

• Seamless switching with fading on RGB output

• Selectable RGB analogue format in output

• Maintenance of settings

• Optional remote control

• Can be controlled via RS232

• Possibility of cascade

• Autoswitching, autosequencing and mute

DVIDEC100-M

ELPRO Video Labs s.r.l.

Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY

Tel.+39 0119348778 - FAX +39 0119348779

4x1 DVI SWITCHER & HIGH RESOLUTION SCALER

Table of Contents

Summary of Contents for ELPRO DVIDEC100

Page 1 • Optional remote control • Can be controlled via RS232 • Possibility of cascade • Autoswitching, autosequencing and mute DVIDEC100-M ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 2: Table Of Contents
Technical data 11.0 Notes When installing the DVIDEC100 unit, please read this booklet carefully. The manufacturer shall not be held responsible for any damage or injury caused by use, even correct, of its products. Product data and characteristics may be modified without prior notice.
Page 3: Overview
(OPTIONAL) Conformity certificate The DVIDEC100 unit routes DVI-D video signals present on the four input channels to a DVI-D output and to a high resolution RGB output on which it is possible to select resolution from SVGA to SXGA. The Y,Cb, Cr format progressive from 480p to 1080i is also available.
Page 4 For details of functioning of the IR remote control, see chap. 7.0 For the data exchange protocol via RS232, refer to chap. 8.0 ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 5: Power Supply
A ground connection is mandatory 3.0 SETTINGS The DVIDEC100 unit does not have any internal presets to be made by the user. Certain pre-settings can be made directly from the keyboard (See chap. 6.3) or using the dip-switch on the back (See chap. 9) ELPRO Video Labs s.r.l.
Page 6: Installation
Connect the RGB destination ((Video-projector or plasma or TFT monitors) to the VGA OUT output WARNING It is advisable to use Elpro DVI and VGA cables in order to exploit the characteristics of the compensation circuit of the DVIDEC100 ELPRO Video Labs s.r.l.
Page 7: Auxiliary Functions
Connect the audio of all the sources to the stereo RCA inputs identified as AUDIO INPUTS. The DVIDEC100 has two audio outputs: one balanced and one not balanced. The audio signal is the same on both outputs. Connect the unbalanced audio output to its destination (usually a VHS recorder).
Page 8: Local Control
IR receiver can be disabled or re-activated holding down simultaneoulsy the DV1 and DVI4 keys on switching on the machine. ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 9: Functions With Ir Remote Control
6th Group - 1 key: RESOLUTION RESOLUTION Sets the format of the signal on the high resolution output. The format set is displayed by the leds on the console of the DVIDEC100. 7th Group - 6 keys: MUTE, AUTOSWITCH, AUTOSEQUENCING...
Page 10 If the user intends to develop personalized software, the RS232 protocol to be implemented is available on the same site.(This user manual). All functions of the DVIDEC100 scaler can be controlled through transmission/reception from computer of strings of hexadecimal and ASCII characters.
Page 11 1 indicates mute on Example: to activate muting, the following characters must be sent on line: 6D 31 0D The scaler DVIDEC100 replies: (Hex 06) if the command has been performed correctly NACK (Hex 15) if transmission errors have occurred 8.4 Setting of autoswitching...
Page 12 NACK (Hex 15) if transmission errors have occurred 8.8 Save settings The current status of the DVIDEC100, i.e. the input selected, the resolution of the output, image regulation parameters (brightness, contrast, saturation, sharpness) is saved in the non-volatile memory. The mute condition is not saved.
Page 13 0 or 1 autosequencing status 0 or 1 hex character 0D The meaning of the parameters sent by the DVIDEC100 is the same as that of the related commands. 8.12 Firmware identifier request The host must send the following sequence...
Page 14 XX indicates brightness value to be set (from 00 to 48) Example: to set brightness to 28, the following characters must be sent on line: 59 42 32 38 The DVIDEC100 scaler replies: (Hex 06) if the command has been performed correctly NACK (Hex 15) if transmission errors have occurred 8.13.2 Setting of contrast...
Page 15 Example: to set 4-step wide positive horizontal shift , the following characters must be sent on line: 48 2B 30 34 0D The DVIDEC100 scaler replies: (Hex 06) if the command has been performed correctly NACK (Hex 15) if transmission errors have occurred 8.14.2 Setting of Vertical Position...
Page 16: Cascade
9.0 CASCADE Compatibly with source signal quality, several DVISEL403 switchers followed by a DVIDEC100 can be connected in cascade to obtain a switcher of up to a maximum of 13 inputs. A VGA switcher, type TZW403/803 can be inserted after the DVIDEC100: in this way, a mixed DVI+VGA switcher is obtained using the VGA output of the last TZW403/803 of the cascade.
Page 17: Technical Data
Size (WxDxH) :483x210x44 Weight : 3Kg Operating temp.range :0÷45° Safety :according to EN60065 :according to EN55103-1 and EN55103-2 Mark ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 18: Notes
During the warranty period, Elpro will repair the faulty units free of charge. The faulty units must be sent CARRIAGE FREE to the Elpro offices in Turin with a regular accompanying note.
Page 19 DVIDEC100 4x1 DVI SWITCHER & HIGH RESOLUTION SCALER ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 20 DVIDEC100 4x1 DVI SWITCHER & HIGH RESOLUTION SCALER ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...