5
PUTTING THE TWINGUARD INTO OPERATION
To put your Twinguard into operation, you
need to download the Bosch Smart Home
App and have successfully activated your
Smart Home Controller.
To put your Twinguard into operation you
need to pair your mobile device with the WiFi
network to which your Smart Home Controller
is connected.
Follow the instructions in the Bosch Smart Home
App to connect further smoke alarms. To do so,
scan the QR code on the back of the smoke alarm.
10
5.1 Twinguard activation
The app will now prompt you to activate the
Twinguard smoke alarm. To do so, remove the
red plastic pin on the back of the device.
The Twinguard is activated once you remove
the red plastic pin. Please note that a test
alarm will be triggered if you unintentionally
press the control button.