Sanyo VZU-485 Instruction Manual page 12

RS232C (RF4QR/NA GB Operation Board)
Fri. Sept., 06/2002
COMMANDS (RS-232C/RS-485)
STATUS SENSE (D7H)
Bit assignation for each byte of data
Byte 1
BIT Content when the bit is 0.
ERROR When an incorrect
command is received. The
CLEAR ERROR (41H) or
0
CLEAR (56H) command
must be sent before any
other command can be
accepted.
1 Undefined Always 0.
2 Undefined Always 0.
CASSETTE OUT No cassette loaded in the
3
VCR.
REC INHIBIT Loaded cassette has no
4
erasure-prevention tab.
5 Undefined Always 0.
6 Undefined Always 0.
7 Undefined Always 1.
Byte 2
BIT Content when the bit is 0.
0 Undefined Always 0.
1 Undefined Always 0.
2 Undefined Always 0.
WARNING Something wrong with the
3
VCR.
4 Undefined Always 0.
5 Undefined Always 0.
6 Undefined Always 0.
7 Undefined Always 0.
English
Byte 3
BIT
0 Undefined
1 Undefined
REPEAT MODE
2
3 Undefined
ON-SCREEN ON
4
COUNTER
5
MEMORY
6 TIMER REC ON
7 Undefined
Byte 4
BIT
0 Undefined
1 REC MODE
2 EJECT
3 RVS PLAY
4 STOP MODE
5 REW MODE
6 FF MODE
7 PLAY MODE
Byte 5
BIT
STILL MODE
0
1 PAUSE MODE
2 Undefined
3 Undefined
REVIEW MODE
4
CUE MODE
5
6 Undefined
7 Undefined
11
Content when the bit is 0.
Always 0.
Always 0.
Autorepeat recording
mode.
Always 0.
The superimpose display
appears on the screen.
The counter memory of
the unit is ON.
Timer recording mode ON.
Always 0.
Content when the bit is 0.
Always 0.
Recording.
Ejecting the cassette.
In reverse playback mode.
In stop mode.
Rewinding.
Fast-forwarding.
Playing back.
Content when the bit is 0.
In playback still or field
advance mode.
In record pause mode.
Always 0.
Always 0.
Reverse picture search
mode.
Forward picture search
mode.
Always 0.
Always 0.