Connection To External Equipment; Pc Module - Philips BDS4622V/00 User Manual

6. CONNECTION TO EXTERNAL EQUIPMENT

User Manual BDS4622V/R and BDS4624R
6.1

PC MODULE

The PC module is designed for connecting this monitor to a VGA card
on PC to make it a PC monitor.
D-SUB (15-pin): Connect to the analog RGB output interface on the
VGA card. (Select VGA from INPUT)
DVI: Connect to the DVI-I digital RGB output interface on the VGA
card. (Select DVI from INPUT)
Notes:
The DVI port on your plasma display is for connecting to the DVI-I
port on the VGA card. No analog signal is available from this port.
The RS-232 port on your plasma display is for firmware update by
professionals. It should not be used for communication purpose.
23