Advertisement

Quick Links

AquaLiv Water System – Model A305
Usage & Installation Instructions
Welcome to AquaLiv Water and congratulations! You just purchased the most complete and comprehensive water
purification and enhancement system available today.
The AquaLiv Water System produces energized, structured, alkaline water - just as nature intended.
Enjoy the water!

DAILY USE

Some AquaLiv technologies require water to be moving, while others require water to be still. Therefore, it will take
24 hours of normal use for the system to 'charge up' and up to a week of normal use for maximum power.
NOTE: After installation, the water may be cloudy or taste heavily of minerals and/or somewhat bitter for 2-3
weeks. This is normal as it takes some time for the filters to become conditioned to the source water. To help
alleviate this condition, AquaLiv suggests a 5-minute flush when the off-taste is noticed or daily for the first week
of use.
The A305 Purification Module will require filter changes every 12 months or 1000 gallons – whichever comes first
– or if the water begins to flow too slowly.
To order replacement filters, visit aqualiv.com and select Filter Set FS300.
To order replacement or alternative installation parts, visit aqualiv.com and select Parts.
The AquaLiv Water Revitalizer requires no maintenance. Attempts to open the tank may damage the head and
sub-assembly. If the internal tamper seals are broken, the system warranty will be void.
pH TESTING – pH testing drops and paper strips do not work with structured water. Use a digital pH meter.
WARRANTY – Your Warranty begins with the purchase date on your receipt. Do not lose your receipt!
Your AquaLiv Water System is warrantied against material defects and errors in workmanship for a period of two (2) years. Faucets have a one (1) year
warranty. The warranty does not cover damage to the system or any property damage, including flood and/or water damage. All plumbing systems
should be inspected periodically after installation to ensure an absence of leaks that may result in damage to surrounding areas.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A305 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AquaLiv A305

  • Page 1 WARRANTY – Your Warranty begins with the purchase date on your receipt. Do not lose your receipt! Your AquaLiv Water System is warrantied against material defects and errors in workmanship for a period of two (2) years. Faucets have a one (1) year warranty.
  • Page 2 It is best to remove all under-sink contents prior to installation. If installing the AquaLiv faucet where a dishwasher air-gap/vent currently resides, simply tie up the air- gap at the highest point available in the under-sink cabinet. Ensure this level is at least a few inches above the drain connection point of the dishwasher.
  • Page 3 4. Connect the tube/hose/pipe from the kitchen faucet to the Cold Water Connection Tee. Do not over tighten In the event that the Cold Water Connection Tee does not fit your water connection, please visit shop.aqualiv.com and select Parts for alternative installation components.
  • Page 4 The Purification Module OUT will be connected to the Revitalizer IN. The Revitalizer OUT will be connected to the AquaLiv faucet. Ensure the preferred position of the Modules is possible within the length of the 36” flexible tubing units.
  • Page 5 IMPORTANT NOTE Tubing that is not fully seated will result in leaks. STEP #7: Filling and Flushing AquaLiv Water System 1. Open the system faucet fully and then slowly open the cold water supply valve. IMPORTANT: Watch for leaks and be ready to shut off the cold water supply.
  • Page 6 The AquaLiv Water System in now installed! IN AN EMERGENCY Should the water supply to the AquaLiv Water System need to be shut off while cold water is wanted at the kitchen faucet: 1. Close the cold water supply valve 2.

Table of Contents