Table of Contents
Advertisement
4. Engage the water tank cover with the latch, and press it tightly.
5. Turn On The Power:
Continuous spray mode:
Press the power/mist time setup switch for 3 seconds, release when hearing the
"beep", power will be turned on completely after LED is lighted. When power is
turned on, both of mist spray and air ionizer/ozone function are activated at the
same time.
Intermittent spray mode (in the cycle of 15 minutes spray and pause for 5
minutes):
Press the power/mist time setup switch for 3 seconds, release when hearing the
"beep" and LED is blinking, then the intermittent spray mode is activated.
Note: When placing this product in a room without air circulation for a long period of time, and
the mist is spraying at the same direction, then the water mist will fall slowly and
accumulate into water drops.
6. Mist Time Setup:
The default mist time is one hour (after one hour the device will shut down
automatically). To change di erent mist time modes by pressing the
power/time setup switch gently (please refer to the gures below). The mist
time can be set up from 1 hour to 15 hours.
4hr
4hr
2hr
8hr
2hr
8hr
2hr
1hr
1hr
1-hr mode
2-hrs mode
3-hrs mode
4hr
4hr
2hr
8hr
2hr
8hr
2hr
1hr
1hr
6-hrs mode
7-hrs mode
8-hrs mode
4hr
4hr
2hr
8hr
2hr
8hr
2hr
1hr
1hr
11-hrs mode
12-hrs mode
13-hrs mode
7
Press it tightly
4hr
4hr
4hr
8hr
2hr
8hr
2hr
8hr
1hr
1hr
1hr
4-hrs mode
5-hrs mode
4hr
4hr
4hr
8hr
2hr
8hr
2hr
8hr
1hr
1hr
1hr
9-hrs mode
10-hrs mode
4hr
4hr
4hr
8hr
8hr
2hr
8hr
2hr
1hr
1hr
1hr
14-hrs mode
15-hrs mode
7. Mist Spray Volume Adjustment:
There are 4-level of mist spray volume adjustment mode, which is indicated
from the 4 di erent size of dots. The smallest dot indicates the smallest mist
spray volume, the biggest dot indicates the largest mist spray volume.
Smallest
Medium
8. RH% Adjustment:
There are 3-level of humidity adjustment (50%, 60%, 70%). Press the humidity
level adjustment switch to set up the humidity level. When the humidity level
reaches to the setup level, the mist spray will stop automatically. When all the
3-level of humidity (50%, 60%, 70%) LED lights are o , it indicates that auto
RH% is deactivated.
60
60
50
70
50
70
50
RH
RH
50% RH
60% RH
9. Turn O The Air Ionizer / Ozone Function:
When the device's power is turned on, the air ionizer/ozone is turned on at the
same time. To turn o the air ionizer/ozone by pressing the air ionizer/ozone
switch for 3 seconds, release after hearing the "beep", then the air ionizer/o-
zone function is turned o .
Press
60
3 seconds
50
70
RH
Beep ～～～
General
Largest
60
60
70
50
70
RH
RH
RH% is deactivated
70% RH
8
Advertisement
Table of Contents
