Advertisement
Quick Links
Advertisement
Related Manuals for Aqua One AquaReef 200
Summary of Contents for Aqua One AquaReef 200
- Page 1 AquaReef 200 Instruction Manual...
- Page 2 Congratulations, you have purchased one of the finest GENERAL SAFETY NOTICE quality aquariums available. This product will give you many years of excellent service when installed and It is absolutely imperative that you ensure this cabinet maintained correctly. and aquarium is installed upon level flooring. It is also a prerequisite that.
-
Page 3: Important Safeguards
Important Safeguards This appliance is not intended for use by or cleaning. Never yank the cord to pull it from children or infirm persons without supervi- the outlet. Grasp the plug and unplug to discon- sion. Young children should be supervised nect. - Page 4 AquaReef 200 Filter Media Installation: Step 1: First remove the light units, filter media and return pump from the aquarium. Step 2: Remove the protein skimmer from the filter located at the rear of the aquarium. This will help when installing filter media.
- Page 5 AquaReef 200 Skimmer Instructions: Collection cup Venturi adjustment Flow adjustment Airline clamp Outlet nozzle Pump to skimmer connector Airline Venturi connector Level adjuster Pump Step 1. The skimmer should arrive pre assembled but the following checks will need to be done.
- Page 6 AquaReef 200 Light Unit Installation: Rear light unit Front light unit (Short tube should be over the filter unit) Step 1: Remove the light units and flap sets from the boxes. Step 2: There are 2 different light units, one is T5 which is positioned at the front of the aquarium. The second is T8 with one tube smaller than the other should be positioned at the rear, the shorter (lower output) tube is designed to be over the refugium filter.
- Page 7 Your new aquarium uses standard tubes (supplied). They are available as replacement parts from your local Aqua One dealer. Light tubes are not covered by the guarantee. Life expectancy is generally 10 months or more, however tubes loose their output gradually over time.
- Page 8 AquaReef 200 Main Tank Installation: Step 1: Once all the equipment has been unpacked and installed the aquarium can be filled with water. Step 2: Fill up the main aquarium. When water enters the filter via the weir check the filter is filling with water.
-
Page 9: Troubleshooting
2. If an air stone is being used check it is not 5. Use an Aqua One 4 in 1 algae scraper (Sold bubbling water over the rim of the aquarium if separately) and gently scrape away any algae so turn the air pump down. - Page 10 Notes...