Advertisement
Available languages
Available languages
BEFORE INSTALLING AND USING YOUR POWERED WINCH, READ AND
FOLLOW ALL MOUNTING INSTRUCTIONS AND SAFETY MESSAGES.
1. Mounting
WARNING
To prevent accidental activation of the winch and serious injury, complete the winch installation
and attach the hook before installing the wiring.
1. Before Installation
1.1 Inspect Parts
Hand Saver Cable Strap
Clutch Knob
Instruction/Owners Manual
Winch Assembly
Pendant Remote Control
Pendant Remote Control Socket
Mounting Hardware Requirements
WARNING
ALWAYS torque mounting bolts to the values specified for your winch in Table 4 page 8 to prevent
vibration during operation.
ALWAYS use Grade 5 / 8.8 Metric hardware.
NEVER weld mounting bolts.
ALWAYS choose the proper bolt length for your application.
ALWAYS confirm required bolt length to ensure proper thread engagement.
1.2 Select Mount Location
WARNING
ALWAYS choose a mounting location that is sufficiently strong to withstand the maximum
pulling capacity of your winch.
1.2.1 Winch Mounting
WARNING
1. Your mounting surface must be equal to or greater than the footprint of the winch frame.
2. The wire rope shall be underwound as seen below.
6
Installation Instructions
Underwind
HORIZON GLOBAL •
Roller Fairlead
Control Box
Handle Bar Control Switch
Snatch Block
Hook
Hardware
Figure 2
Right
Overwind
F4106-00 REV A (9528) 11/17
Wrong
Advertisement
