Setup Menu; Video Recorder, Dvd Or Satellite Keys - Philips 28PT7308/12 User Manual

Setup Menu

& Press ¢ and Ê on the remote control at the
same time.
é With the cursor, select
INSTALLATION
Menu language
Country
Automatic installation
B Digital Sources
Manual installation
Give name
Reshuffle
Favourite programmes
B SETUP
" Use the cursor to adjust :
•
Digital sources :
peripheral (DVD, satellite receiver, ...), select
the corresponding connector :
or .
EXT2 None
• select the programme(s) that use the
Decoder :
external decoder then select the connector

Video recorder, DVD or Satellite keys

.
MODE
VCR
∫
Y
Ÿ
AUX
· ¢ Ê Æ
Œ % ¤
SMART ACTIVE SMART
-
ª
CONTROL
OK
MENU
+ +
MUTE
VOL [ P
- -
ù ›
∏
ZOOM
1 2 3
4 5 6
7 8 9
0
Ë Á
and press
SETUP
SETUP
Decoder/Descrambler
Information line
Factory settings
Auto Surround *
Installation
if you have connected a digital
FRONT
Most of the audio and video equipment from our range of products can
be operated with the remote control of the TV.
The remote control is compatible with all video recorders and satellite receivers
using the RC5 standard and all DVDs using the RC6 standard.
& To prepare for the first time the remote control for a DVD, press
2
simultaneously. Or to prepare for a satellite receiver, press
simultaneously.The setting is memorized for the
é Press the
MODE
or (DVD or satellite receiver).The remote control indicator lights
AUX
up to display the selected mode. It switches off automatically after 20
seconds if left idle.The remote control automatically returns to TV mode.
" The following keys are operational, depending on the equipment :
b
standby,
·
recording,
¢
fast rewind,
Ê
stop,
Æ
play,
∫
fast forward,
a
%
VCR timer,
c
DVD : title selection,
o
DVD : subtitle selection / VCR : tape list function,
H
menu,
cursor navigation and adjustments,
u
validation,
09
digit keys,
@ P # programme selection,
e
audio selection.
d
OSD menu,
◊
DVD :T-C function / VCR : index function.
where the decoder is connected :
EXT2
u
If the decoder is connected to the video recorder,
.
select the video recorder's connector (
•
Information line :
display of information on the programme (if
available).This information (name of channel or
broadcast) is displayed when the channels are
changed or by pressing
defined by the programme.
•
Factory settings :
factory picture and sound settings.
• Auto Surround
when this function is switched on, the
television set will automatically select Virtual
, ,
EXT1
Dolby Surround sound when the identification
signal is being transmitted.
' To exit, press
key to select the required mode :
H
. Press to return to the previous menu.
to activate or disable the
d
u
press
(only available on certain versions):
H
several times.
AUX
VCR
or
EXT1
).
EXT2
.The content is
to reset the
u
and
u 1
and
mode.
(video recorder)
11